Data center generator stock | 60Hz three-phase
In-Stock 2.1MW DCP & 3.3MW ESP Diesel Generators for Data Centers
Ready-to-ship MW diesel generator sets for data center backup power projects. If you need a diesel generator for data center expansion, review 2.1MW DCP and 3.3MW ESP options with EPA and UL documentation, factory inspection support, and open skid or silent type configuration subject to final confirmation.
Multiple units in stock, subject to final confirmation
EPA and UL document package available for review
Factory visit, video inspection, and FAT coordination
Open skid or silent type configuration for project fit

2.1MW DCP
DGS-WP2100S, 2625kVA / 2100kW, 416V, 60Hz, 3-phase.
3.3MW ESP
DGS-WP3300S, 4125kVA / 3300kW ESP, 480/415V, 60Hz.
EPA / UL
Certificate package available for procurement review; exact EPA details require document confirmation.
Factory direct
Inspection welcome, direct shipment after commercial and logistics confirmation.
In-stock generator options
Two MW diesel generator for sale options for urgent data center projects.
Use these stock diesel genset for sale options as the starting point for voltage, rating, enclosure, and shipping review. Final availability and shipment schedule are subject to final confirmation.
2 megawatt generator class
2.1MW DCP Diesel Generator

Best fit when the buyer is screening a data center power generator optimized for mission-critical outage standby operation.
3 megawatt generator class
3.3MW ESP Diesel Generator

Use this option when the project needs higher single-unit standby capacity. Do not treat 3.3MW ESP as 3.3MW prime power.
Selection logic
Choose between 2.1MW DCP and 3.3MW ESP by load, voltage, and duty cycle.
For a data center backup generator, the first decision is not only kW. Confirm required voltage, actual load profile, redundancy scheme, enclosure, exhaust routing, and how the generator is expected to run during a utility outage.
Use 2.1MW DCP for data center optimized standby projects requiring 416V class output.
Use 3.3MW ESP when the project needs higher standby capacity and accepts 3.0MW PRP as the prime rating.
Confirm 415V, 416V, or 480V interface requirements before quote and shipment.
Confirm whether open skid or silent diesel generator configuration is required by the site.
DCP, ESP and PRP ratings before you buy
The 2.1MW unit is presented as DCP for data center outage standby operation. The 3.3MW unit is ESP standby power with 3.0MW PRP. Procurement teams should verify operating mode, expected annual hours, average load factor, and redundancy design before treating a rating as suitable for the project.
Configuration
Open skid or silent type diesel generator configuration.
Match the equipment package to the project site: generator room, outdoor enclosure, sound-controlled site, or containerized installation path.
Open skid type
Best for equipment rooms, generator buildings, and EPC-integrated installations where ventilation, exhaust, fuel, and acoustic treatment are handled by the project team.
Silent type
Use a silent genset or soundproof diesel generator package when site noise control, weather protection, and faster packaged deployment matter.
Factory options
ATS connection, synchronizing system, extended fuel tank, remote control, and additional control modules can be reviewed by project requirement.
60Hz technical review
Built for 60Hz three phase diesel generator projects.
Both generator sets are 1800RPM, 0.8 power factor, 3 phase diesel generator configurations with ComAp InteliGen 1000 SC control. The 3.3MW option supports 480V 3 phase generator and 415V class discussions; the 2.1MW datasheet specifies 416V.
Frequency
60Hz
Rated speed
1800RPM
Power factor
0.8
Phase
3-phase
Control system
ComAp InteliGen 1000 SC
Project functions
AMF, ATS connection, monitoring, protection


Procurement review
EPA & UL certificate package for project review.
LETON can provide EPA diesel generator and UL diesel generator documentation for procurement review. Datasheets reference UL 2200 and related standards; exact EPA certificate details, emissions tier, and import requirements must be verified against the actual document package before publication or contract.
Request certificate package before internal approval.
Verify project country import and emissions requirements.
Confirm model, serial/document match before payment.
Do not rely on public landing page copy as a substitute for certificate review.
Factory stock and inspection
Inspect real MW generator inventory before shipment.
Workshop photos help buyers verify current stock, configuration, and inspection readiness before arranging factory visit, video inspection, FAT, load test coordination, and direct shipment.




Quote and delivery process
Move from diesel generator price request to inspection and shipment.
For high-value MW equipment, LETON confirms technical fit first, then commercial terms, documents, inspection, and shipment schedule.
1
Confirm load and voltage
Send MW requirement, voltage, frequency, site type, redundancy plan, and destination.
2
Choose model and package
Select 2.1MW DCP or 3.3MW ESP, then confirm open skid or silent type configuration.
3
Receive quote and documents
Review diesel generator price, datasheet, EPA/UL package, photos, and commercial terms.
4
Inspect and ship
Arrange factory inspection or video inspection, then finalize shipment after commercial confirmation.
Buyer FAQ
Questions buyers ask before reserving MW generator stock.
These answers keep the landing page useful for SEM traffic while preserving final commercial confirmation.
Are these diesel generators in stock?
Yes, multiple units are presented for stock review, but exact quantity, configuration, and shipment slot are subject to final confirmation.
What is the diesel generator price?
Pricing depends on selected model, voltage, open skid or silent type package, certificate package, destination, and shipment timing. Request a current quote.
Is the 3.3MW generator prime rated?
No. The 3.3MW figure is ESP standby power. The datasheet lists 3.0MW PRP prime power.
Can the 2.1MW unit be used for data centers?
Yes. The 2.1MW unit is positioned as DCP data center power for outage standby operation, subject to project load review.
Is 415V the same as 416V?
The 2.1MW datasheet specifies 416V. Use 415/416V class only for preliminary discussion and confirm the exact site interface before order.
Can multiple units be paralleled?
Synchronizing and paralleling requirements can be reviewed, including control, switchgear, load profile, redundancy, and site integration.
Secure ready-to-ship MW generator stock for your data center project.
Send your MW requirement, voltage, frequency, destination, timeline, and open skid or silent type preference. LETON will confirm current availability, diesel genset price, documentation, inspection path, and shipment options.
Required power: 2.1MW DCP, 3.3MW ESP, or other load profile
Voltage and frequency: 416V, 480/415V, 60Hz, 3-phase
Configuration: open skid, silent type, ATS, synchronizing, fuel tank
Destination country, shipment target, and inspection preference











